Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Standard Radio from a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Car stereo

The instructions in this guide will allow you to remove and replace the standard radio of a Citroen Xsara Picasso in simple steps. First, get inside the vehicle and start unscrewing all the fixing screws found on the side; extract the radio from the central console and disconnect the wiring located at the back, as shown in the video. At this point, perform the repair or replacement of the radio, installing the new one; then check the correct operation of the new radio!

Posted on 5 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Original Radio from a Citroen Xsara Picasso
How to Remove the Original Radio from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How to remove the original radio from a Citroen Xsara Picasso? Let’s see how to perform the disassembly in this video. Turn off the radio, then use a…
How to Remove the Stereo on a Citroen Xsara Picasso
How to Remove the Stereo on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How to remove the original radio on a Citroen Xsara Picasso? Carefully follow these steps to disassemble it. Remove the side plastic covers next to t…
Replacing the Radio in Citroen Xsara Picasso
Replacing the Radio in Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video, you will see how to remove the radio from the Citroen Xsara Picasso. First, get into the car and turn everything off: then take a scre…

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos