Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the Citroën Xsara Picasso car radio

Model: Citroen Xsara Picasso MK 1 - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

Video tutorial

Today with the help of this short video tutorial we will explain how to replace the car radio on a Citroen Xsara Picasso. Before starting the replacement, turn off the car's instrument panel.

Using a flat tip screwdriver, lift the side covers of the car radio and using a star screwdriver, unscrew the two screws located on the sides to lock the car radio. Insert the flat tip screwdriver on the lower ends of the car radio to lever it outwards, allowing us to remove the car radio.

Disconnect the antenna cable and the car radio connector to remove it. Connect the new cables inside the new car radio and after making the necessary modifications, connect them to the new car radio. Insert the car radio into the compartment and tighten the side screws.


Posted on 15 May 2025 by ScegliAuto


Related tutorials

Removing the Standard Radio from a Citroen Xsara Picasso
Removing the Standard Radio from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) The instructions in this guide will allow you to remove and replace the standard radio of a Citroen Xsara Picasso in simple steps. First, get inside …
How to Remove the Stereo on a Citroen Xsara Picasso
How to Remove the Stereo on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) How to remove the original radio on a Citroen Xsara Picasso? Carefully follow these steps to disassemble it. Remove the side plastic covers next to t…
How to replace the radio in the Citroën Xsara Picasso?
How to replace the radio in the Citroën Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) To replace the radio in the Citroën Xsara Picasso, lift the two plastic panels located on either side of the device: once these are lifted, you will …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos