Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the "Service" Light on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Service warning light

Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the instrument panel, while keeping it pressed, turn on the instrument panel. Then, continue to hold the button for another 10 seconds. After ten seconds, release the button. Once you have completed this last step, the "Service" light on your Citroen Xsara Picasso will turn off, and you will have successfully completed the reset.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Citroen Xsara Picasso
How to reset the service light on the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Today we will explain how to reset the service light, related to the car service on a 2006 Citroen Xsara Picasso in less than two minutes. To reset t…
Resetting the Service Light on a Citroen Xsara Picasso
Resetting the Service Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Below are the instructions to reset the service light on a Citroen Xsara Picasso. First, get in the vehicle and press and hold the button located at …
How to Reset the Service Light on a Citroen Xsara Picasso
How to Reset the Service Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this tutorial, you will see how to reset the service light on a Citroen Xsara Picasso, a very simple and quick operation to perform only after com…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos