Do it yourself
Frequently asked questions about cars and motorcycles

How to Perform the Service Reset on a Citroën Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Service warning light

On the Citroën Xsara Picasso, resetting the service light is done directly from the instrument cluster without diagnostic tools. In the video, the car is shown with the ignition off, and you start by locating the trip button on the dashboard. While holding the button, turn the key to the ignition position without starting the engine. At this point, a countdown appears on the display indicating that the maintenance indicator is being reset. It is important to keep holding the button until the countdown is complete, without releasing it beforehand. Once the procedure is completed, the display on the Citroën Xsara Picasso shows confirmation of the reset (maintenance mileage restored). At this point, you can release the button, turn off the ignition, and turn it back on to verify that the service light is no longer present.

Posted on 19 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Citroen Xsara Picasso (1999-2012 / MK 1) Today we will explain how to reset the service light, related to the car service on a 2006 Citroen Xsara Picasso in less than two minutes. To reset t…
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
Citroen Xsara Picasso (1999-2012 / MK 1) In this tutorial, you will see how to reset the service light on a Citroen Xsara Picasso, a very simple and quick operation to perform only after com…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos