Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Resetting the Service Light on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Service warning light

Below are the instructions to reset the service light on a Citroen Xsara Picasso. First, get in the vehicle and press and hold the button located at the bottom left of the instrument panel display; then insert the key and turn on the instrument panel, waiting for the countdown to complete the reset of the service light, as shown in the video. At this point, turn off the instrument panel and start the engine, thus completing the reset of the engine oil change light!

Updated on 3 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
How to Perform the Service Reset on a Citroën Xsara Picasso
How to Perform the Service Reset on a Citroën Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) On the Citroën Xsara Picasso, resetting the service light is done directly from the instrument cluster without diagnostic tools. In the video, the ca…
How to Remove the Rear Shock Absorber from a Citroen Xsara Picasso
How to Remove the Rear Shock Absorber from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before starting, lift the rear of your Citroen Xsara Picasso. Begin by loosening and removing the bolts that secure the rear wheel to the hub, then r…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos