Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster on a Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Instrument cluster

How to remove the instrument cluster located in the centre of the dashboard on a Citroen Xsara Picasso? Follow these steps to disassemble the parts: use a lever to remove the plastic covers of the instrument cluster. Unscrew the securing screws located at the sides of the instrument cluster with a screwdriver; after removing the screws, pull the piece out from the dashboard and disconnect the power cable located at the back of the instrument cluster. Fit the new piece or (replace the LEDs/bulbs in the cluster) and reassemble the same. Finally, reverse the assembly steps.

Updated on 4 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the "Service" Light on a Citroen Xsara Picasso
How to Reset the "Service" Light on a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you begin, sit in the driver's seat of your Citroen Xsara Picasso. Start by pressing and holding the button located at the bottom left of the …
How to Remove the Dashboard of a Citroën Xsara Picasso
How to Remove the Dashboard of a Citroën Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) To remove the dashboard of a Citroën Xsara Picasso, first remove the plastic covers around the steering wheel by loosening the appropriate securing s…
Replacing Headlight Bulbs on Citroen Xsara Picasso
Replacing Headlight Bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the front headlight bulbs of your Xsara Picasso blown and need replacing? Here’s how to remove them. Open the front bonnet by pulling the lever l…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos