Do it yourself
Frequently asked questions about cars and motorcycles

The air conditioner of a Citroen C4 Picasso is not working: possible causes and remedy

Model: Citroen C4 Picasso MK 2 - Years 2013-2022
Part: Air conditioning

A problem that often occurs with Citroen C4 Picasso is the failure of the dual-zone air conditioning system, as shown in this video. The youtuber has removed the lower part of the dashboard so we can check if the levers move when commanded from the screen. In fact, the flaps are located right where we removed the cover, on both sides. If we also remove the lower part and set it to "foot heating" mode and then place the phone underneath in "selfie" mode, we can see that there is a lever that moves there as well. We then check the radiator, remove the additional heater used to warm the air when the water is still cold. A temperature measurement of the water in the radiator is taken, showing that the temperature is much higher in the upper part compared to the lower part: this indicates that the radiator is clogged, so the solution is to remove and clean it, or replace it.

Posted on 10 February 2025 by ScegliAuto

Video tutorial

Related tutorials

Citroen C4 Picasso (2006-2013 / MK 1) Today we will discover the main issues related to the automatic transmission and any possible solutions on the Citroen C4 Picasso. First of all, we g…
Citroen C4 Picasso (2013-2022 / MK 2) Resetting the air conditioning of the Citroen C4 Picasso is a very simple operation, which can be done independently thanks to our mini video tutoria…
Citroen C4 Picasso (2013-2022 / MK 2) In this video, we will see how to synchronize the airflow of the air conditioning system on a Citroen C4 Picasso II: this is a realignment procedure …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos