Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. Xsara Picasso
    4. : Replace the headlight bulbs on Citroen Xsara Picasso

Citroen Xsara Picasso - Video tutorial

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Headlight bulb
Operation: Replace the headlight bulbs on Citroen Xsara Picasso

Are the headlight bulbs burned out? We see the disassembly on a Citroen Xsara Picasso. We open the bonnet by pulling the lever located at the bottom right of the dashboard, let's put it in safety. We remove the rear caps of the headlights and (placed in the back of the headlights). We take out the lamp holders from the headlight and go to extract the damaged bulb. We mount the new bulb and insert the lamp holder into the headlight. We mount the rear cap of the headlight. We test the correct functioning of the lights: we open the door and enter the vehicle, we turn on the instrument panel and the operating lever.


Posted on 12 December 2023 by ScegliAuto



Replacement headlight bulbs on Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Are the Xsara Picasso headlight bulbs burned out and therefore need to be replaced? Let's see how they disassemble. We open the front hood by pulling
How to replace the headlight bulbs in Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) In this tutorial we can see how to replace the headlight bulbs in the Citroen Xsara Picasso, a very simple and fast operation. Before proceeding, let
Replace the Citroen Picasso headlight bulbs
Citroen Xsara Picasso (1999-2012 / MK 1) Replacing damaged headlight bulbs on an Xsara Picasso? Let's see how the bulbs are changed. We open the hood of the engine compartment and put it in

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos