Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Door Panel on Citroen Xsara Picasso

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Door trim panel

Remove the door panel on a Xsara Picasso. Disconnect the battery terminals located in the engine bay. Remove the plastic from the door panel area (speaker); take off the plastic covering the handle. Unscrew the screws in the handle and the remaining screws on the door panel, then detach the retaining clips. Pull the panel off with your hands and disconnect it from the door (unplug the wiring harness and the opening cable). Perform the desired maintenance inside the door. Install the new door panel on your Xsara Picasso.

Updated on 16 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Front Door Panel from the Citroen Xsara Picasso
Removing the Front Door Panel from the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Let's see the instructions that will allow us to remove and replace the front door panel of the Citroen Xsara Picasso in simple steps. First, open th…
How to Remove the Door Panel of a Citroen Xsara Picasso
How to Remove the Door Panel of a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) Before you start, open the door of your Citroen Xsara Picasso. First, unclip the insert of the internal door handle using a thin but sturdy tool as a…
Removing the Door Panel from a Citroen Xsara Picasso
Removing the Door Panel from a Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) In this video tutorial, you will learn how to remove the door panel from a Citroen Xsara Picasso by following these simple steps. First, open the fro…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos