Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Sliding Door Handle on a Citroen Jumpy

Model: Citroen Jumpy MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Handle

See other generations:
Video tutorial

Here’s how to reset the sliding door handle on a Citroen Jumpy (or the twin models Peugeot Boxer and Fiat Ducato). As seen in the video, the external handle of the sliding door, on the side of the vehicle, detaches from its housing, creating an annoying play or gap between the handle and the door panel.

This often happens because the front hook of the handle pops out of its mechanical attachment point. Locate and loosen the screw; remove the black adhesive on the edge of the door, in line with the handle.

Underneath, there is a Torx T screw: loosen it a few turns without removing it. Detach the handle and pull it forward (towards the front bumper) to unlock the rear part. Look into the gap at the front of the handle: with a thin tool, pull the visible spring mechanism towards you. Hook the plastic hook of the handle behind that mechanism.

Now push the entire handle back to reposition the rear pin; tighten the T20 screw you loosened and check by pulling the handle to ensure the door opens smoothly.


Posted on 27 August 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter in a Citroen Jumpy 3?
How to Replace the Air Filter in a Citroen Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) In the following guide, find the description of all the steps to correctly replace the engine air filter in your Citroen Jumpy Mk3. Before starting, …
How to Reset the Service Light on a Citroën Jumpy?
How to Reset the Service Light on a Citroën Jumpy?
Citroen Jumpy (2016-2026 / MK 3) To reset the Service light on a Citroën Jumpy, press and hold the button located in the central left part of the instrument panel, with the wrench ic…
How to Reset the Service Light in a Citroen Jumpy Van?
How to Reset the Service Light in a Citroen Jumpy Van?
Citroen Jumpy (2016-2026 / MK 3) In this tutorial, you will see how to reset the service light in a Citroen Jumpy van, a very simple and quick operation that should only be done afte…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos