Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you disassemble the bumper of the Citroen Jumpy 3?

Model: Citroen Jumpy MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Front bumper

See other generations:
Video tutorial

The bumper of a car is removed because it is usually damaged by a collision, the paint has been ruined after years of exposure to the elements, or it is desired to replace it with an aftermarket model for aesthetic upgrade, etc. Let's say that the procedure is quite standard, in fact, the bolts in the upper area must be unscrewed, those in the lower area, continuing with the front wheel arches and from there access the fixing bolts of the same bumper, located at the back.

After that, it is grabbed and pulled, the connector of the electrical cables behind it is disconnected, and the work is completed.


Posted on 14 August 2025 by ScegliAuto


Related tutorials

How to Remove the Bumper from the Citroen Jumpy 3?
How to Remove the Bumper from the Citroen Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) The decision to remove the bumper, in this specific case the rear bumper, from the Citroen Jumpy 3 can be prompted by various reasons, such as repain…
How to Replace the Air Filter in a Citroen Jumpy 3?
How to Replace the Air Filter in a Citroen Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) In the following guide, find the description of all the steps to correctly replace the engine air filter in your Citroen Jumpy Mk3. Before starting, …
How to Replace the Diesel Filter on a Citroen Jumpy
How to Replace the Diesel Filter on a Citroen Jumpy
Citroen Jumpy (1994-2007 / MK 1) Before you can start, open the bonnet of your Citroen Jumpy. First, disconnect and move the hoses connected to the diesel filter by loosening the res…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos