Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Bumper from the Citroen Jumpy 3?

Model: Citroen Jumpy MK 3 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Rear bumper

See other generations:
Video tutorial

The decision to remove the bumper, in this specific case the rear bumper, from the Citroen Jumpy 3 can be prompted by various reasons, such as repainting, replacing, repairing, or making aesthetic and structural modifications. Watch the video provided to see how to proceed: Using a screwdriver or, for convenience, a power drill, remove the front, upper, and lower fastening screws, as well as those located behind the wheel arches, which also need to be removed.

After doing this, disconnect any wiring clips that may be present and proceed with the removal of the bumper.


Updated on 17 October 2026 by ScegliAuto


Related tutorials

How do you disassemble the bumper of the Citroen Jumpy 3?
How do you disassemble the bumper of the Citroen Jumpy 3?
Citroen Jumpy (2016-2026 / MK 3) The bumper of a car is removed because it is usually damaged by a collision, the paint has been ruined after years of exposure to the elements, or it…
How to replace the cabin filter in the Citroën Jumpy?
How to replace the cabin filter in the Citroën Jumpy?
Citroen Jumpy (2007-2016 / MK 2) To replace the cabin filter in the Citroën Jumpy, open the bonnet to access the components inside the engine bay: on the right side, just below the w…
How to Replace the Diesel Filter on a Citroen Jumpy
How to Replace the Diesel Filter on a Citroen Jumpy
Citroen Jumpy (1994-2007 / MK 1) Before you can start, open the bonnet of your Citroen Jumpy. First, disconnect and move the hoses connected to the diesel filter by loosening the res…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos