Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Bumper of the Citroen Xsara Picasso?

Model: Citroen Xsara Picasso MK 1 - Years 1999-2012
Part: Rear bumper

As seen in the video provided, the reason for proceeding with the removal of the rear bumper of the Citroen Xsara Picasso is to repair a crack. In fact, this is not the only reason; there are several, for example, wanting to install an aftermarket part to make the car's line sportier, etc. Regarding the removal, start by removing all the fixing pins at the bottom, then at the top edge, and finally, remove the rear wheel arch liners to access and unscrew the other fixing pins. After pulling the bumper forward, finish by disconnecting the electrical connectors.

Posted on 6 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you remove the bumper of the Citroen Xsara Picasso?
How do you remove the bumper of the Citroen Xsara Picasso?
Citroen Xsara Picasso (1999-2012 / MK 1) Here we are with a short but comprehensive video guide, useful in case you want to do-it-yourself the disassembly of the front bumper of your Citroen…
How to Remove the Rear Bumper of the Citroen Xsara Picasso
How to Remove the Rear Bumper of the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) This guide outlines the steps to remove and replace the rear bumper of the Citroen Xsara Picasso. First, open the boot lid and remove the rear lights…
How to disassemble the front headlight of the Citroen Xsara Picasso
How to disassemble the front headlight of the Citroen Xsara Picasso
Citroen Xsara Picasso (1999-2012 / MK 1) These short and simple instructions will show us how to disassemble and replace the front headlight and its bulbs of the Citroen Xsara Picasso. First…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos