Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the tire pressure warning light on the Toyota Corolla?

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part:

In order to completely reset the tire pressure sensor of the Toyota Corolla, you will need to inflate the tires until they reach the optimal pressure value: this value is written on the sticker that is attached to the driver's side door pillar. Once the inflation is done, you can go inside the cabin and open the glove box on the front passenger side: here you will find the SET button that must be held down until the sensor light turns off. After that, you can also turn off the instrument panel.

Posted on 26 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the tire pressure warning light on the Toyota Corolla?
How do you reset the tire pressure warning light on the Toyota Corolla?
Toyota Corolla (2013-2019 / MK 4, E170, E160) The procedure to reset the tire pressure light on the Toyota Corolla is done by inflating the tires to the correct pressure value: this value is indi…
How to Reset the Tyre Pressure Light on the Toyota Corolla?
How to Reset the Tyre Pressure Light on the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) To reset the tyre pressure light on the Toyota Corolla, you must first inflate all tyres to the recommended pressure: this value is indicated on the …
How to reset the tyre warning light in the Toyota Corolla?
How to reset the tyre warning light in the Toyota Corolla?
Toyota Corolla (2006-2013 / MK 3) In this tutorial, you will see how to reset the tyre warning light in the Toyota Corolla, a very simple and quick operation to perform only after res…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos