Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the Starter Motor Located in the Toyota Corolla?

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Starter motor

See other generations:
Video tutorial

In this video, you can see where the starter motor is located in the Toyota Corolla and how to proceed if you need to replace it, which is a very simple task. As shown, the starter motor is positioned at the lower front area of the engine.

Before proceeding with the replacement, ensure that the key is not inserted, then disconnect the negative terminal of the battery and remove the radiator fan. Next, disconnect the power leads from the starter motor, unscrew the mounting bolts with a 14mm spanner, and separate it from the bracket.

To fit the replacement, simply follow the reverse procedure.


Updated on 13 September 2026 by ScegliAuto


Related tutorials

Removing the Starter Motor on a Toyota Corolla
Removing the Starter Motor on a Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) This guide covers the removal of the starter motor on a Toyota Corolla. Lift the car with a jack or column lift to access the piece. Before removing …
Replacing the starter motor on the Toyota Corolla Verso
Replacing the starter motor on the Toyota Corolla Verso
Toyota Corolla (2006-2013 / MK 3) The instructions in this guide will show you how to remove and replace the starter motor on the Toyota Corolla Verso. First, open the bonnet and disc…
How to replace the starter motor of the Toyota Corolla
How to replace the starter motor of the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) The following steps will show us how to disassemble and replace the starter motor of the Toyota Corolla with VVT-I gasoline engine, as well as the Co…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos