Do it yourself
| ||||
|
Toyota Corolla - Video tutorial
Model: Toyota Corolla
MK 2
- Years 2000-2007 Below we will see the steps that will allow us to disable the airbag light on the Toyota Corolla. When turning on the dashboard, we will see that the airbag light remains on; this happens after the airbag has been activated. To be able to disable the light, after replacing the airbag with a new one, it is necessary to disconnect the electrical connector that we find under the driver's seat, as shown in the video; in this way, the control unit will reset, zeroing the light. If the problem persists, try disconnecting and reconnecting the battery terminals.
Posted on 25 April 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the service in the Opel Antara?As we can see in this tutorial, resetting the service in the Opel Antara is an extremely simple and fast operation. Before proceeding, of course, we must have completed all the planned maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel, not the engine. At this point, we release the accelerator and press it 3 consecutive times, always all the way. We then restart the panel to verify that the procedure has been carried out correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.052
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |