Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : EGR valve

Toyota Corolla - EGR valve

EGR Valve Toyota Corolla (1995-2002 / mk 1)

Toyota Corolla (1995-2002 / MK 1)
How to Remove the EGR Valve on a Toyota Corolla
In this tutorial, see how to replace the EGR valve on a Toyota Corolla, a very simple and quick operation. First, ensure the engine is sufficiently cool, then …Read all…
Posted on 30 September 2026 by ScegliAuto
Cigarette lighter (6) Airbag (4) Alternator (2) Speaker (1) Antenna (3) Car stereo (10) Battery (24) Ignition coil (1) Grille (1) Transmission (5) Spark plugs (1) Glow plugs (1) Body (8) Glove compartment (4) Control unit (1) Key (48) Trunk lock (1) Timing belt (9) V-belt (4) Air conditioner (3) A/C controls (2) Onboard computer (6) Checks and maintenance (52) Dashboard (4) Bearing (2) Brake rotors (1) Rear bench seat (4) Headlight (11) Tail light (6) Fog lights (5) Air filter (10) Cabin air filter (14) Fuel filter (2) Diesel fuel filter (4) Parking brake (2) Clutch (1) Fuel injectors (4) Window switch (1) Xenon headlight kit (1) Light bulb (8) Side marker bulb (2) Headlight bulb (14) Tail light bulb (15) Interior dome light bulb (7) Antifreeze coolant (2) License plate light (5) (1) Handle (6) Engine (1) Power window motor (1) Starter motor (8) Transmission fluid (1) Brake fluid (1) Engine oil (7) Clock (44) Door trim panel (8) Front bumper (11) Rear bumper (3) Brake pads (4) Shift knob (10) Pump (2) Fuel pump (18) Car door (1) Push button (1) Power window switch (1) Instrument cluster (6) Radiator (1) Wheel (1) Fuse box (129) Seat (24) Parking sensors (2) Door lock (6) Side mirror (11) Warning light – error code (39) (1) Tire pressure warning light (87) Service warning light (127) Manufacturer emblem (1) Fuel cap (11) Windshield wipers (6) Thermostat (2) EGR valve (1) Blower motor (5) Side window (4) Steering wheel (2)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos