Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the EGR Valve on a Toyota Corolla

Model: Toyota Corolla MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: EGR valve

See other generations:
Video tutorial

In this tutorial, see how to replace the EGR valve on a Toyota Corolla, a very simple and quick operation. First, ensure the engine is sufficiently cool, then open the bonnet and locate the valve on the left side of the engine.

Next, disconnect the power connector by unlocking the clip, unscrew the two fixing screws using a cross-head screwdriver, and remove the plastic cover. Now, extract the valve, insert the replacement, and reassemble everything by following the reverse procedure.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

How to remove the rear seats from the Toyota Corolla?
How to remove the rear seats from the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To remove the rear seats from the Toyota Corolla, simply remove the fastening clips located under the seat: start by lifting the front part of the se…
Removing Third Brake Light on Toyota Corolla
Removing Third Brake Light on Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) In this video tutorial, we will see how to remove the third brake light/centre stop light on a Toyota Corolla. First, open the boot and press the tab…
How to Identify the Fuse Diagram in a Toyota Corolla
How to Identify the Fuse Diagram in a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) The video in question shows the fuse diagrams present in a Toyota Corolla. The fuse panel located inside the vehicle's cabin includes components assi…

Other guides you may be interested in

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos