Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Handle

Toyota Corolla - Handle

Toyota Corolla (2013-2019 / MK 4, E170, E160)
How do you remove the exterior handle of the Toyota Corolla?
In order to remove the external handle of the Toyota Corolla, you need to open the corresponding door so that you can access the screw located on its left …read all…
Posted on 1 April 2024 by ScegliAuto
Toyota Corolla (1995-2002 / MK 1)
How to replace the exterior door handle of the front door of the Toyota Corolla
In today's video tutorial we will see how to remove and replace the exterior door handle of the Toyota Corolla, following these simple steps. First we open the …read all…
Posted on 16 October 2022 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
How to replace the Toyota Corolla seat handle?
In order to replace the inside handle of the Toyota Corolla you have to completely disassemble the door panel, so that you have access to the components in its …read all…
Posted on 7 May 2024 by ScegliAuto
Toyota Corolla (1995-2002 / MK 1)
How to replace the exterior door handle of the Toyota Corolla?
In order to replace the Toyota Corolla external door handle, the internal door panel must be removed: to do this, loosen the screw in the internal handle …read all…
Posted on 7 March 2024 by ScegliAuto
Toyota Corolla (2006-2013 / MK 3)
Toyota Corolla exterior handle replacement
Let's see the replacement of the exterior handle of a Toyota Corolla. We open the door and begin removing the door panel. We remove the internal handle …read all…
Posted on 26 January 2024 by ScegliAuto
Cigarette Lighter (6) Airbags (2) Alternator (1) Loudspeaker (1) Antenna (3) Car stereo (4) Battery (16) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (1) Glove box (2) Control unit (1) Key (26) Locking the trunk (1) Timing belt (6) V-belt (3) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (89) Dashboard (4) Bearing (1) Brake discs (1) Headlight (9) Tail light (3) Air filter (8) Cabin air filter (10) Petrol filter (1) Diesel filter (4) Clutch (1) Injectors (2) Window lift switch (1) Xenon headlight kit (1) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (6) Antifreeze liquid (1) License plate light (3) Handle (5) Engine (1) Starter motor (5) Brake oil (1) Engine oil (7) Door panel (6) Front bumper (7) Rear bumper (1) Brake pads (4) Tires (9) Gear Shift Knob (9) Pump (2) Fuel pump (15) Door (1) Window lift button (1) Instrument cluster (19) Wheel (1) Fuse box (63) Seat (15) Lock (3) Outside rearview mirror (8) Manufacturer's coat of arms (1) Windscreen wipers (4) Thermostat (1) EGR valve (1) Interior blower (3) Side window (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos