Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : How to replace the exterior door handle of the front door of the Toyota Corolla

Toyota Corolla - Video tutorial

Model: Toyota Corolla MK 1 - Years 1995-2002
Part: Handle
Operation: How to replace the exterior door handle of the front door of the Toyota Corolla

In today's video tutorial we will see how to remove and replace the exterior door handle of the Toyota Corolla, following these simple steps. First we open the front door and begin to disassemble and remove the door panel; to do this we unscrew the screws located on it, unscrewing the screws with a Phillips screwdriver and removing the window control panel, as shown in the video. At this point we are going to unscrew the screws of the external handle, removing it together with the lock cylinder; we apply the reverse procedure for reassembly!


Posted on 16 October 2022 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Corolla 2019-2026 - Where to buy an external handle for the Toyota Corolla? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos