Do it yourself
| ||||
|
How to replace the Toyota Rav 4 power window switch
Model: Toyota Rav 4
Xa40, MK 4
- Years 2013-2018 Do you drive at night and find the lack of light on the window control and central locking push-button panel annoying? Here I am to explain to you how to make the replacement. Let's get the new push-button panel compatible with the car model in our possession. Now let's get a set of screwdrivers and plastic levers. To remove the main panel let's pry with the plastic device and extract the whole. Let's disconnect the two connectors using the tabs on them, tightening the tab and pulling the connector. Once the block has been removed, let's unscrew the three cross screws that hold the controls in place and reassemble the new set of controls, fixing it well with the three screws removed previously. Reassemble the components on the door having inserted the connectors first. To test the operation, turn on the ignition and try all the buttons.
Posted on 7 June 2024 by ScegliAuto
This video is currently unavailable
Remove speakers on Toyota Rav 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) The speakers mounted in the front doors of the Toyota RAV 4 no longer work? Let's see how they dismount from the door. We remove with a lever the pla
How to remove the right door panel of a Toyota Rav 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) How do you remove the door panel of a Toyota Rav 4? Let's see together in this video how to proceed with the disassembly. Before starting the disasse
Disassembly of the Toyota Rav window lifter motor 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In this video tutorial we will see the instructions that will allow us to disassemble the window lifter motor of the Toyota Rav 4. First we open the Other guides that may interest you
|
How to deactivate the safe lock on a Volkswagen Golf.The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.046
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |