Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Window Regulator Motor from the Toyota Rav 4

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Power window motor

In this video tutorial, follow the instructions to remove the window regulator motor from the Toyota Rav 4. First, open the front door and start by removing the door panel; to do this, take off the various plastic covers and unscrew all the screws located underneath, disconnecting the electrical connector from the switch panel. Once the panel is removed, unscrew the screws from the window regulator mechanism; remove the side glass and disconnect the electrical connector from the motor to take it out, as shown in the video!

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Starter Motor of a Toyota Rav 4
How to Replace the Starter Motor of a Toyota Rav 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Before starting, open the bonnet of your Toyota Rav 4. Begin by removing the battery, followed by the battery support base. This will give you access…
How to replace the mechanism and motor of the Toyota RAV 4 window lift
How to replace the mechanism and motor of the Toyota RAV 4 window lift
Toyota Rav 4 (2006-2013 / MK 3, Xa30) These short and simple instructions will show us how to disassemble and replace the motor and window regulator of the Toyota RAV 4. First, we open th…
Replacing the Starter Motor on a RAV 4
Replacing the Starter Motor on a RAV 4
Toyota Rav 4 (2000-2006 / Xa20, MK 2) Replace the starter motor on a Toyota RAV 4 with the necessary parts. Open the front bonnet and lift it, then disconnect the battery power cables. Un…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos