Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the door panel on the Toyota RAV 4?

Model: Toyota Rav 4 Xa30, MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Door trim panel

See other generations:
Video tutorial

To replace the door panel on the Toyota RAV 4, first remove the trims located by the external mirror and along the grab handle. Then, proceed by extracting the window switch panel and disconnecting the connectors underneath.

Next, loosen the screws located beneath the grab handle trim and at the internal handle location. At this point, the panel can be completely detached from the door.

Insert the new replacement part and secure it properly with the screws removed earlier.


Updated on 13 August 2026 by ScegliAuto


Related tutorials

How to Repair the Door Lock on a Toyota RAV 4
How to Repair the Door Lock on a Toyota RAV 4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) This guide outlines the steps to dismantle and repair the door lock on a Toyota RAV 4. First, open the front door and start removing the door panel b…
How to Remove the External Door Handle of the Toyota RAV 4
How to Remove the External Door Handle of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this short and simple guide, you will learn how to remove and replace the external door handle of the front door of the Toyota RAV 4. First, open …
How to Remove the Rear Door Panel on a Toyota RAV 4
How to Remove the Rear Door Panel on a Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) Below are the instructions that will allow you to remove and replace the rear door panel on the Toyota RAV 4 in simple and quick steps. First, open t…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos