Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the External Door Handle of the Toyota Rav 4?

Model: Toyota Rav 4 MK 2, Xa20 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Handle

See other generations:
Video tutorial

To replace the external door handle of the Toyota Rav 4, open the door and remove the rubber cap located on its side. By removing this rubber cap, you will be able to loosen the underlying screw and consequently detach the part of the handle with the lock.

Once this part is removed, you can also detach the remaining part that constitutes the actual handle. After removal, insert the new handle first, followed by the part with the lock, securing it with its screw on the side.


Updated on 4 June 2026 by ScegliAuto


Related tutorials

How to Remove the External Door Handle of the Toyota RAV 4
How to Remove the External Door Handle of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) In this short and simple guide, you will learn how to remove and replace the external door handle of the front door of the Toyota RAV 4. First, open …
How to Replace the Sun Visor on a Toyota RAV4
How to Replace the Sun Visor on a Toyota RAV4
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To replace the sun visor on a Toyota RAV4, release the pin located on the innermost part of the visor. Once this part is freed, detach the cover of t…
How to Remove the Rear Bumper of the Toyota Rav 4?
How to Remove the Rear Bumper of the Toyota Rav 4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To replace the rear bumper of the Toyota Rav 4, open the boot door and detach the fastening clips located inside. Next, remove the external cover of …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos