Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Rav 4
    4. : How do you remove the rear bumper of the Toyota Rav 4?

Toyota Rav 4 - Video tutorial

Model: Toyota Rav 4 Xa20, MK 2 - Years 2000-2006
Part: Rear bumper
Operation: How do you remove the rear bumper of the Toyota Rav 4?

In order to replace the rear bumper of the Toyota Rav 4 you need to open the tailgate of the luggage compartment and unhook the fixing clips that are inside. Next, you will need to remove the outer cover of the spare wheel and remove all the rivets under it. In this way the bumper will have been released and it will be possible to remove it from the lower part of the tailgate. Once the old bumper has been removed, a new one must be positioned, which must be suitably fixed with the appropriate external rivets.


Posted on 9 June 2022 by ScegliAuto

    Frequently Asked Questions

    • Rav 4 2013-2018 - How much does it cost to replace the rear bumper of a 2018 Toyota RAV4? Read Answer
    • Rav 4 2019-2026 - How to remove the rear bumper from Toyota RAV 4? Read Answer
    • Rav 4 2013-2018 - How much does it cost to replace the Toyota Rav 4 bumper? Read Answer
    • Rav 4 2006-2013 - How much does it cost to replace the rear bumper of the Toyota Rav4? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos