Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Bumper on the Toyota RAV 4?

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Rear bumper

To remove the rear bumper from the Toyota RAV 4, you must first remove the fixing rivets located at the bottom of the bumper. Once removed, loosen the bolts found inside the wheel arches, along with those near the rear lights. Once all bolts and rivets have been removed, you can detach the bumper from its housing. The position lights can be removed from the old bumper and installed on the new one, which can be secured with the appropriate bolts and rivets.

Updated on 25 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear bumper of the Toyota RAV 4
How to disassemble the rear bumper of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / MK 4, Xa40) Below we will see the disassembly and replacement instructions for the rear bumper of the Toyota RAV 4, in simple and quick steps. First, open the re…
How to Replace the Rear Bumper on a Toyota RAV 4?
Toyota Rav 4 (2019-2026 / Xa50, MK 5) To replace the rear bumper on a Toyota RAV 4, open the boot and loosen the two screws located at the corners, just above the seal. Once these two scr…
How to Remove the Rear Bumper of the Toyota Rav 4?
How to Remove the Rear Bumper of the Toyota Rav 4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) To replace the rear bumper of the Toyota Rav 4, open the boot door and detach the fastening clips located inside. Next, remove the external cover of …

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos