Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the rear bumper of the Toyota Rav 4?

Model: Toyota Rav 4 Xa50, MK 5 - Years 2019-2024
Part: Rear bumper

In order to replace the rear bumper of the Toyota Rav 4, the tailgate of the luggage compartment must be opened and the two screws located in the corners, immediately above the gasket, must be loosened. Once these two screws have been removed, it will be possible to remove the rivets located inside the two wheel arches. At this point, the external moldings of the wheel arches will have to be removed and the screws underneath loosened. In this way, the bumper can be detached, disconnecting the relative connectors as well. The new bumper can then be connected to the appropriate connectors and fixed to its housing using the appropriate screws and rivets.


Posted on 20 March 2024 by ScegliAuto



How to disassemble the rear bumper of the Toyota RAV 4
Toyota Rav 4 (2013-2018 / Xa40, MK 4) Below we will see the disassembly and replacement instructions for the rear bumper of the Toyota RAV 4, in simple and quick steps. First, open the re
How do you remove the rear bumper of the Toyota Rav 4?
Toyota Rav 4 (2000-2006 / Xa20, MK 2) In order to replace the rear bumper of the Toyota Rav 4 you need to open the tailgate of the luggage compartment and unhook the fixing clips that are
How to replace the rear bumper of the Toyota Rav 4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To be able to remove the rear bumper of the Toyota RAV 4 you must first remove the fixing rivets located in the lower part of the bumper. Once remove

    Frequently Asked Questions

    • Rav 4 2019-2026 - How to remove the rear bumper from Toyota RAV 4? Read Answer

How to deactivate the safe lock on a Volkswagen Golf.

The safe lock is indeed an anti-theft system that prevents thieves from accessing the car. This device locks the doors, both externally and internally, when the driver activates the central locking remote control after leaving the vehicle. To permanently disable it, it is necessary to use a diagnostic program such as VCDS that we will connect to the vehicle through the ODBII port. Then wait for the connection and recognition of the control unit and then select the blocks present and locate the safe lock to disable it. And the job will be completed.

Watch the video!


by ScegliAuto

More videos