Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Rear Bumper on a Toyota RAV4

Model: Toyota Rav 4 Xa40, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018
Part: Rear bumper

See other generations:
Video tutorial

Below are the instructions for removing and replacing the rear bumper on a Toyota RAV4, in simple and quick steps. First, open the tailgate and start removing all the plastic clips found on the upper and lower parts of the rear bumper; similarly, remove the clips located on both sides of the rear wheel arches, as shown in the video.

At this point, gently detach the bumper from the sides until it is completely removed, then install the new one; apply the reverse procedure for reassembly!


Updated on 16 October 2026 by ScegliAuto


Related tutorials

Toyota Rav 4 (2000-2006 / MK 2, Xa20) To replace the rear bumper of the Toyota Rav 4, open the boot door and detach the fastening clips located inside. Next, remove the external cover of …
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To remove the rear bumper from the Toyota RAV 4, you must first remove the fixing rivets located at the bottom of the bumper. Once removed, loosen th…
Toyota Rav 4 (2019-2026 / MK 5, Xa50) To replace the rear bumper on a Toyota RAV 4, open the boot and loosen the two screws located at the corners, just above the seal. Once these two scr…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos