Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the External Door Handle of the Toyota RAV 4

Model: Toyota Rav 4 MK 5, Xa50 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Handle

See other generations:
Video tutorial

In this short and simple guide, you will learn how to remove and replace the external door handle of the front door of the Toyota RAV 4. First, open the front door and start disassembling and removing the door panel by unscrewing all the fixing screws; then, unclip the handle mechanism from the inside of the door, removing the rectangular piece and then the entire handle, as shown in the video.

At this point, replace and install the external door handle, finally reassembling the internal door panel, following the video tutorial to the end!


Updated on 22 September 2026 by ScegliAuto


Related tutorials

How to Replace the External Door Handle of the Toyota Rav 4?
How to Replace the External Door Handle of the Toyota Rav 4?
Toyota Rav 4 (2000-2006 / MK 2, Xa20) To replace the external door handle of the Toyota Rav 4, open the door and remove the rubber cap located on its side. By removing this rubber cap, yo…
How to replace the door panel on the Toyota RAV 4?
How to replace the door panel on the Toyota RAV 4?
Toyota Rav 4 (2006-2013 / Xa30, MK 3) To replace the door panel on the Toyota RAV 4, first remove the trims located by the external mirror and along the grab handle. Then, proceed by extr…
How to disassemble the external rearview mirror of the Toyota RAV 4
How to disassemble the external rearview mirror of the Toyota RAV 4
Toyota Rav 4 (2019-2026 / MK 5, Xa50) The following steps will show us how to disassemble and replace the external rearview mirror of the Toyota RAV 4. First, we open the front door of th…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos