Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the sun visor of the Toyota RAV 4?

Model: Toyota Rav 4 MK 3, Xa30 - Years 2006-2013
Part: Checks and maintenance

In order to replace the sun visor flap of the Toyota RAV 4, you need to release the pin located on the innermost part of the flap: once this part is freed, you can detach the covering of the support located on the outermost part. By removing the covering, you can also release the support of the outer part, so that the old flap can be completely removed; the new one can then be inserted in its place, securing it with the appropriate hooks and also securing it on the inside to the respective pin.

Posted on 26 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the sun visor flap of the Toyota RAV4
Replacement of the sun visor flap of the Toyota RAV4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this short guide, we will see the instructions that will allow us to disassemble and replace the sun visor of the Toyota RAV 4. First of all, we g…
How to Replace the Sun Visor on a Toyota Rav 4 MK3
How to Replace the Sun Visor on a Toyota Rav 4 MK3
Toyota Rav 4 (2006-2013 / MK 3, Xa30) In this short and simple video, we will see how to remove and replace the sun visor on a Toyota Rav 4 MK3. First, get into the vehicle and start by r…
How to Remove and Replace the Sun Visor on a Toyota Rav 4
How to Remove and Replace the Sun Visor on a Toyota Rav 4
Toyota Rav 4 (2006-2013 / MK 3, Xa30) How do you remove and replace the sun visor in the cabin of a Toyota Rav 4? It is a very easy operation if you follow the right steps. First, unscrew…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos