Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Repair and Disassembly of Window Switch Button

Model: Toyota Corolla MK 1 - Years: 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002
Part: Window switch

See other generations:
Video tutorial

If the door window does not work, the fault may lie in the button that controls its movement. After obtaining the replacement part, use a plastic tool to avoid damaging the bodywork and pry around the control panel on the door to remove it. Disconnect the connectors from the circuit by pulling them gently.

Reconnect the connectors to the new buttons, pushing them until you hear a click. Ensure they are connected in the correct orientation by identifying the reference notch.

Turn the ignition key to the 'on' position and check for proper operation.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

How to Remove the Window Switches on the Toyota Corolla
How to Remove the Window Switches on the Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) In this video tutorial, learn how to remove and replace the window switch panel on the Toyota Corolla in simple, quick steps. First, open the front d…
Replacing the Window Regulator Motor on a Toyota Corolla
Replacing the Window Regulator Motor on a Toyota Corolla
Toyota Corolla (1995-2002 / MK 1) The following steps will guide you on how to remove and replace the window regulator motor on a Toyota Corolla. First, open the front door of the veh…
How to disassemble the glove compartment drawer of the Toyota Corolla
How to disassemble the glove compartment drawer of the Toyota Corolla
Toyota Corolla (2000-2007 / MK 2) Below we will see the procedure for disassembling and replacing the glove compartment drawer of the Toyota Corolla, in simple and quick steps. First …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos