Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the glove compartment drawer of the Toyota Corolla

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Glove compartment

See other generations:
Video tutorial

Below we will see the procedure for disassembling and replacing the glove compartment drawer of the Toyota Corolla, in simple and quick steps. First of all, we get into the car on the front passenger side, and start by opening the glove compartment drawer; then we unscrew the side screw of the drawer rod, in order to release it and remove it gently, as shown in the video.

At this point, we proceed with the repair or replacement with the new one, fixing it correctly on the sides; then we verify that it closes perfectly on the dashboard closure!


Posted on 9 December 2024 by ScegliAuto


Related tutorials

How to Reset the Tyre Warning Light on the 2016 Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) To correctly reset the tyre warning light on the instrument panel of your 2016 Toyota Corolla, follow these simple steps. First, start the instrument…
How to Remove the External Wing Mirror on a Toyota Corolla
How to Remove the External Wing Mirror on a Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) In this new mini guide dedicated to the Toyota Corolla (latest model), you will learn how to remove the external wing mirror independently. Thanks to…
How to replace the cabin filter on the Toyota Corolla
How to replace the cabin filter on the Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) Replacing the air filter inside the cabin of your Toyota Corolla (2019-2023) is a simple yet important task. Below are the steps to follow to complet…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos