Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Tyre Warning Light on the 2016 Toyota Corolla

Model: Toyota Corolla E160, E170, MK 4 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Tire pressure warning light

See other generations:
This video is currently unavailable

To correctly reset the tyre warning light on the instrument panel of your 2016 Toyota Corolla, follow these simple steps. First, start the instrument panel if it is still off, then move to the passenger seat and open the glove compartment.

Locate the "Set" button on the left side of the compartment and hold it down for a few seconds until the tyre warning light turns off. Finally, close the glove compartment and turn off the instrument panel.


Updated on 25 August 2026 by ScegliAuto


Related tutorials

Toyota Corolla (2006-2013 / MK 3) Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
Toyota Corolla (2019-2026 / MK 5, E210) To completely clear the tyre pressure warning light on a Toyota Corolla, you will first need to inflate the tyres until they reach the recommended pr…
Toyota Corolla (2013-2019 / E160, E170, MK 4) To reset the tyre pressure warning light on a Toyota Corolla, turn the ignition on by rotating the key in the ignition switch. Once the dashboard is …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos