Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Toyota Corolla?

Model: Toyota Corolla MK 4, E170, E160 - Years 2013-2019
Part: Tire pressure warning light

To reset the tyre pressure warning light on a Toyota Corolla, turn the ignition on by rotating the key in the ignition switch. Once the dashboard is illuminated, open the glove compartment located on the passenger side. On the left side of the glove compartment, you will find the tyre pressure reset button: if the tyres are at the correct pressure, press and hold the button. This will make the warning light disappear from the dashboard, and you can then switch off the ignition.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Light on a 2017 Toyota Corolla
How to Reset the Tyre Pressure Light on a 2017 Toyota Corolla
Toyota Corolla (2013-2019 / MK 4, E170, E160) In this video, you will see how to reset the tyre pressure light that appears on the instrument panel of a 2017 Toyota Corolla; before performing thi…
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
How to reset the tyre pressure warning light on the Toyota Corolla Hybrid
How to reset the tyre pressure warning light on the Toyota Corolla Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) Below are the steps necessary to reset the tyre pressure warning light on the Toyota Corolla Hybrid; before performing the reset, ensure all four tyr…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos