Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tyre pressure warning light on the Toyota Corolla?

Model: Toyota Corolla MK 3 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Tire pressure warning light

See other generations:
Video tutorial

To reset the tyre pressure warning light on the Toyota Corolla, first inflate the car's tyres to the recommended pressure value: this value is indicated on the sticker affixed inside the driver's door pillar. After inflating the tyres, turn on the instrument panel and then press and hold the button at the bottom of the steering column: this will make the tyre pressure warning light disappear from the instrument panel, which can now be turned off.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
Toyota Corolla (2006-2013 / MK 3) Before you begin, sit in the driver's seat of your Toyota Corolla. Insert the key into the ignition and turn it to the first position to activate the…
How to reset the tyre pressure warning light on the Toyota Corolla Hybrid
How to reset the tyre pressure warning light on the Toyota Corolla Hybrid
Toyota Corolla (2019-2026 / MK 5, E210) Below are the steps necessary to reset the tyre pressure warning light on the Toyota Corolla Hybrid; before performing the reset, ensure all four tyr…
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
How to Reset the Tyre Pressure Warning Light on a Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Today's guide will show you how to reset the tyre pressure monitoring system (TPMS) warning light on a Toyota Corolla. Before performing the reset, e…

How to Extract the Spare Wheel from a Mercedes Vito

The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle.

Watch the video!


by ScegliAuto

More videos