Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Corolla
    4. : Front bumper

Toyota Corolla - Front bumper

Toyota Corolla (2006-2013 / MK 3)
How to disassemble the front bumper of the Toyota Corolla
Today we will explain how to disassemble the front bumper of a car in a simple and fast way. To remove the front bumper on a Toyota Corolla, model produced …read all…
Posted on 6 April 2024 by ScegliAuto
Toyota Corolla (2019-2024 / E210, MK 5)
Disassembly and replacement of the front bumper of the Toyota Corolla.
Today's guide will show us how to disassemble and replace the front bumper of the Toyota Corolla, following the instructions below. First, we open the car's …read all…
Posted on 4 October 2023 by ScegliAuto
Toyota Corolla (2019-2024 / E210, MK 5)
How to remove the front bumper of the Toyota Corolla Se MK5.
The guide shows how to disassemble the front bumper of the Toyota Corolla SE Mk5. The first operation to be performed is to remove the plastic cover of the …read all…
Posted on 10 June 2023 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
How do you remove the front bumper of the Toyota Corolla?
In order to remove the front bumper of the Toyota Corolla you need to open the hood so that you can unscrew the screws that secure the bumper in its upper …read all…
Posted on 19 April 2024 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
How to replace the front bumper on Toyota Corolla
Let's see in this short and simple guide the steps on how to remove and replace the front bumper of the Toyota Corolla, following the instructions below. First …read all…
Posted on 15 April 2024 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
How to remove the front bumper of the Toyota Corolla.
Before proceeding with the disassembly of the front bumper of the Toyota Corolla, we place the car on a plane or on the deck in order to be able to work on it …read all…
Posted on 2 January 2024 by ScegliAuto
Toyota Corolla (2000-2007 / MK 2)
Toyota Corolla-Auris front bumper removal
In this video tutorial we will see the instructions to be able to remove the bumper on various Toyota models, in particular on Corolla and Auris. First of all …read all…
Posted on 30 December 2023 by ScegliAuto
Cigarette Lighter (6) Airbags (2) Alternator (1) Loudspeaker (1) Antenna (3) Car stereo (4) Battery (16) Coil (1) Gearbox (1) Spark plugs (1) Bodywork (1) Glove box (2) Control unit (1) Key (26) Locking the trunk (1) Timing belt (6) V-belt (3) Air conditioning (1) Air conditioning controls (1) -board computer (14) Checks and maintenance (89) Dashboard (4) Bearing (1) Brake discs (1) Headlight (9) Tail light (3) Air filter (8) Cabin air filter (10) Petrol filter (1) Diesel filter (4) Clutch (1) Injectors (2) Window lift switch (1) Xenon headlight kit (1) Light bulb (8) Side turn signal light bulb (2) Headlight bulb (9) Rear light bulb (8) Interior lights ceiling light bulb (6) Antifreeze liquid (1) License plate light (3) Handle (5) Engine (1) Starter motor (5) Brake oil (1) Engine oil (7) Door panel (6) Front bumper (7) Rear bumper (1) Brake pads (4) Tires (9) Gear Shift Knob (9) Pump (2) Fuel pump (15) Door (1) Window lift button (1) Instrument cluster (19) Wheel (1) Fuse box (63) Seat (15) Lock (3) Outside rearview mirror (8) Manufacturer's coat of arms (1) Windscreen wipers (4) Thermostat (1) EGR valve (1) Interior blower (3) Side window (2) Steering wheel (2)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos