Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Bumper of a Toyota Corolla

Model: Toyota Corolla MK 2 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Front bumper

See other generations:
Video tutorial

Before proceeding with the removal of the front bumper of the Toyota Corolla, position the car on a flat surface or on a ramp to work safely and stably. This is a precaution to take every time you perform maintenance on any vehicle.

Now, open the bonnet and, after removing the two plastic clips that secure the grille, unscrew the three bolts using the appropriate tool (as shown in the video), and remove the grille itself. Next, unscrew the bolts on the sides and along the entire lower perimeter that secure the bumper, allowing you to remove it from its position.


Updated on 1 April 2026 by ScegliAuto


Related tutorials

Removing and Replacing the Front Bumper on Toyota Corolla
Removing and Replacing the Front Bumper on Toyota Corolla
Toyota Corolla (2019-2026 / MK 5, E210) This guide will show you how to remove and replace the front bumper on a Toyota Corolla, following the instructions below. First, open the bonnet of …
How to Remove the Front Bumper of the Toyota Corolla?
How to Remove the Front Bumper of the Toyota Corolla?
Toyota Corolla (2000-2007 / MK 2) To remove the front bumper of the Toyota Corolla, open the bonnet to access the screws securing the bumper at the top, also removing any rivets in th…
Replacement of the front bumper of the Toyota Corolla
Replacement of the front bumper of the Toyota Corolla
Toyota Corolla (2013-2019 / E160, E170, MK 4) Following these short and simple steps, we will see how to disassemble and replace the front bumper of the Toyota Corolla. First, open the hood of th…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos