Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bumper Grille on a Toyota Belta Vios

Model: Toyota Belta Vios Xp40 - Years 2002-2014
Part: Grille

This guide provides the main instructions on how to remove and replace the front bumper grille on a Toyota Belta Vios. First, open the hood and start removing the front bumper by unscrewing all the fastening screws located at the top and bottom of the bumper; detach it from the sides by unscrewing the wheel well screws until it is completely removed. Next, detach the grille from the inside of the front bumper; then install the new bumper grille, checking the condition of the bumper, and apply the reverse procedure!

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Grille on the Toyota Belta Vios
How to Replace the Front Grille on the Toyota Belta Vios
Toyota Belta Vios (2013-2023 / Xp150) As shown in the video, replacing the front grille on the Toyota Belta Vios is a simple task. First, remove all the front cover bolts. Some bolts are …
How to Remove the Front Bumper of the Toyota Belta Vios?
How to Remove the Front Bumper of the Toyota Belta Vios?
Toyota Belta Vios (2005-2012 / Xp90) To remove the front bumper of the Toyota Belta Vios, open the hood to access the screws that secure the bumper from the top. Once these screws are lo…
How to Replace the Battery in a Toyota Belta Vios?
How to Replace the Battery in a Toyota Belta Vios?
Toyota Belta Vios (2013-2023 / Xp150) To replace the battery in a Toyota Belta Vios, open the hood to access the components inside the engine compartment. The battery is located on the ri…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos