Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a Toyota Belta Vios?

Model: Toyota Belta Vios Xp150 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

To replace the battery in a Toyota Belta Vios, open the hood to access the components inside the engine compartment. The battery is located on the right side of the engine block, above the air filter housing.

Remove the battery from its housing by unscrewing the mounting screws and disconnecting the power cables. Once the battery is free, you can remove it from its place and install a new one, ensuring it is properly secured and connected to the cables.


Updated on 17 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper of the Toyota Belta Vios?
How to Remove the Front Bumper of the Toyota Belta Vios?
Toyota Belta Vios (2005-2012 / Xp90) To remove the front bumper of the Toyota Belta Vios, open the hood to access the screws that secure the bumper from the top. Once these screws are lo…
How do you activate the cruise control of the Toyota Belta Vios?
How do you activate the cruise control of the Toyota Belta Vios?
Toyota Belta Vios (2005-2012 / Xp90) In order to activate the cruise control of the Toyota Belta Vios, you need to start the engine and drive until you reach the desired cruising speed: …
Replacing the Front Bumper Grille on a Toyota Belta Vios
Replacing the Front Bumper Grille on a Toyota Belta Vios
Toyota Belta Vios (2002-2014 / Xp40) This guide provides the main instructions on how to remove and replace the front bumper grille on a Toyota Belta Vios. First, open the hood and start…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos