Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Toyota
    3. :
  3. Belta Vios
    4. : How do you remove the front bumper of Toyota Belta Vios?

Toyota Belta Vios - Video tutorial

Model: Toyota Belta Vios Xp90 - Years 2005-2012
Part: Front bumper
Operation: How do you remove the front bumper of Toyota Belta Vios?

In order to remove the front bumper of the Toyota Belta Vios you have to open the hood so that you go to loosen the screws that secure the bumper from the top. Once these screws have been loosened, it will be possible to go and unscrew those that secure the bumper from inside the wheel arches of the front wheels: by unscrewing these screws too it will be possible to completely detach the bumper, so that it is replaced with a new piece replacement. This can be fixed to its housing by means of the special screws removed previously.


Posted on 30 April 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos