Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you activate the cruise control of the Toyota Belta Vios?

Model: Toyota Belta Vios Xp90 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Checks and maintenance

See other generations:
Video tutorial

In order to activate the cruise control of the Toyota Belta Vios, you need to start the engine and drive until you reach the desired cruising speed: once you reach this speed, you need to locate the lever with the cruise control symbol, which is located on the right side of the steering column.

You have to press the button at the end of the lever to ensure that the speed is maintained, even while pressing or releasing the accelerator pedal.

By raising this lever, you can increase the cruising speed, and by lowering it, you can decrease the speed.


Posted on 24 December 2024 by ScegliAuto


Related tutorials

How to Replace the Battery in a Toyota Belta Vios?
How to Replace the Battery in a Toyota Belta Vios?
Toyota Belta Vios (2013-2023 / Xp150) To replace the battery in a Toyota Belta Vios, open the hood to access the components inside the engine compartment. The battery is located on the ri…
How to Remove the Front Bumper of the Toyota Belta Vios?
How to Remove the Front Bumper of the Toyota Belta Vios?
Toyota Belta Vios (2005-2012 / Xp90) To remove the front bumper of the Toyota Belta Vios, open the hood to access the screws that secure the bumper from the top. Once these screws are lo…
Replacing the Front Bumper Grille on a Toyota Belta Vios
Replacing the Front Bumper Grille on a Toyota Belta Vios
Toyota Belta Vios (2002-2014 / Xp40) This guide provides the main instructions on how to remove and replace the front bumper grille on a Toyota Belta Vios. First, open the hood and start…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos