Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Battery in a Toyota Belta Vios

Model: Toyota Belta Vios Xp150 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Battery

See other generations:
Video tutorial

If the battery in your vehicle is dead and you want to replace it yourself, you will find the instructions for the steps to follow below and in the video. Once you open the hood, locate the battery on the left side under the windshield.

Then, unscrew the support nuts of the upper plate and disconnect the negative terminal first, followed by the positive terminal. After that, remove the battery from the compartment and place the new one in, then connect the positive terminal first and then the negative terminal, and finally, reattach the nuts of the upper plate.


Updated on 17 July 2026 by ScegliAuto


Related tutorials

How to Replace the Battery in a Toyota Belta Vios?
How to Replace the Battery in a Toyota Belta Vios?
Toyota Belta Vios (2013-2023 / Xp150) To replace the battery in a Toyota Belta Vios, open the hood to access the components inside the engine compartment. The battery is located on the ri…
How do you activate the cruise control of the Toyota Belta Vios?
How do you activate the cruise control of the Toyota Belta Vios?
Toyota Belta Vios (2005-2012 / Xp90) In order to activate the cruise control of the Toyota Belta Vios, you need to start the engine and drive until you reach the desired cruising speed: …
How to Replace the Front Grille on the Toyota Belta Vios
How to Replace the Front Grille on the Toyota Belta Vios
Toyota Belta Vios (2013-2023 / Xp150) As shown in the video, replacing the front grille on the Toyota Belta Vios is a simple task. First, remove all the front cover bolts. Some bolts are …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos