Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Toyota Belta Vios - Battery

Toyota Belta Vios (2013-2023 / Xp150)
How to change Toyota Belta Vios battery
If the battery of our car has run out and we want to replace it in do-it-yourself mode, we will find instructions on the operations to follow in the …read all…
Posted on 5 June 2023 by ScegliAuto
Toyota Belta Vios (2013-2023 / Xp150)
How to replace the battery of the Toyota Belta Vios?
In order to replace the Toyota Belta Vios battery, you need to open the hood, so that you can access the components inside the engine compartment. The battery …read all…
Posted on 2 May 2024 by ScegliAuto
Loudspeaker (1) Battery (2) Key (2) V-belt (2) Checks and maintenance (2) Dashboard (1) Air filter (1) Grille (2) Engine oil (1) Front bumper (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos