Do it yourself
| ||||
|
Ford Fiesta - Video tutorial
Model: Ford Fiesta
MK VI, Fiesta 6, MK 6
- Years 2008-2017 The fuse for the cigarette lighter socket in the 2010 Ford Fiesta is located inside the fuse box inside the vehicle. Specifically, the fuse can be found in the glove compartment on the driver's side. To access the fuse after confirming that the socket is not working, you will need to remove the entire compartment. The specific fuse is numbered as number 6 with a 20-watt rating. Once you have removed the damaged fuse, you will need to insert the new one in its place, and the socket will resume proper functioning. If the problem persists, it means that the issue is caused by the control unit, and in that case, it will be necessary to take the vehicle to a workshop for a computerized diagnosis.
Posted on 4 August 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.049
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |