Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the central locking control unit located in the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Control unit

See other generations:
Video tutorial

In this video, you can see where the central locking control unit is located in the Ford Fiesta and how to proceed if you need to replace it, a very simple operation. As shown, the control unit is located inside the cabin, specifically beneath the dashboard on the driver's side.

To access it and subsequently remove it, start by opening the small glove compartment and unscrewing the indicated screws, then remove the entire panel and disconnect the 5 connectors. Next, unscrew the fixing screws of the control unit, pull it out of its housing, and fit the replacement if necessary.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

Where is the Central Locking Control Unit in a Ford Fiesta?
Where is the Central Locking Control Unit in a Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video, you will see where the central locking control unit is located in a Ford Fiesta, useful if you need to replace it due to a fault. As s…
Where is the Transmission Control Module Located on the Ford Fiesta?
Where is the Transmission Control Module Located on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this video, you can see where the transmission control module is located on the Ford Fiesta and how to proceed if you need to remove it. As shown,…
How to Remove the ABS Module on a Ford Fiesta or Focus
How to Remove the ABS Module on a Ford Fiesta or Focus
Ford Fiesta (2017-2023 / MK 7, MK VII, Fiesta 7) This video shows how to remove the ABS module on a Ford vehicle: the module is located just below the base of the windscreen. You will need a socket …

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos