Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the third brake light in the Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part:

In this tutorial we can see how to disassemble the third brake light in the Ford Fiesta, an extremely simple and quick operation, to be carried out for example to replace the bulb or the light itself. First of all, make sure that the key is not inserted, in order to operate safely, then go to the rear side of the vehicle, locate the two screws at the ends of the taillight and unscrew them using a Torx T20 key. Then grab the third brake light, remove it from the housing and disconnect the connector. At this point, all that remains is to replace the faulty element and reassemble everything.

Posted on 15 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing the Third Brake Light on Ford Fiesta
Removing the Third Brake Light on Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today's video, you'll learn how to remove the third brake light on a Ford Fiesta. The removal process is very simple: first, open the boot lid and…
How to Replace the Third Brake Light on the Ford Fiesta
How to Replace the Third Brake Light on the Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In today’s video, we will see how to replace the third brake light on the early 2000s Ford Fiesta. First, check the owner’s manual to find the correc…
Replacement of the third brake light on a Ford Fiesta
Replacement of the third brake light on a Ford Fiesta
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) In this tutorial today, we will see how to replace the third brake lights of a Ford Fiesta, fifth generation model produced from 2002 to 2005. Let's …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos