Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : How to remove the third stop on Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK V, Fiesta 5, MK 5 - Years 2002-2008
Part: Tail light
Operation: How to remove the third stop on Ford Fiesta

Let's see the removal of the third rear light of a Ford Fiesta. We lift the hatch to access the rear of the hatch and begin removing the headlight. We disconnect the cover caps placed above the sheet: with a plastic lever, help us to make the caps come off. We pry into the holes after removing the cover caps. We extract the headlight once it is free and replace the damaged bulbs with new ones (size and voltage are the same). After replacing the damaged bulbs or the headlight itself, let's get ready to reassemble the headlight with its parts (sheet metal cover caps).


Posted on 11 March 2024 by ScegliAuto



How to disable Start&Stop in Ford Fiesta?
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this short video we can see how to deactivate the Start&Stop system in the Ford Fiesta. The Start&Stop is the system that allows the engine to aut
Central stop replacement on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Open the tailgate, so you can see the two holes located in the rear part of the casing relative to the central stop. Inside these two holes there are
How to reset the Start&Stop system of the Ford Fiesta 1.0L Ecoboost 2013
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) In this guide we will explain the Start & Stop system reset procedure for the 2013 Ford Fiesta 1.0L Ecoboost. In order, the steps to be performed wil

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to replace the left rear light of the Ford Fiesta? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos