Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Ford
    3. :
  3. Fiesta
    4. : Disassembly of the third brake light Ford Fiesta

Ford Fiesta - Video tutorial

Model: Ford Fiesta MK V, Fiesta 5, MK 5 - Years 2002-2008
Part: Light bulb
Operation: Disassembly of the third brake light Ford Fiesta

In today's video, we will see how to disassemble the third brake light of a Ford Fiesta. The disassembly process is very easy: first, we open the trunk door and proceed to remove the two protective caps that we find on the door, as shown in the video. Then, we insert something sharp into the holes to apply pressure and lift upwards: this way, our third brake light will come out of its housing; to remove it permanently, we disconnect the electrical connector at the back or replace the bulbs as shown in the video tutorial. Follow along until the end!


Posted on 8 November 2023 by ScegliAuto



How to replace the third brake light on the Ford Fiesta
Ford Fiesta (2002-2008 / MK V, Fiesta 5, MK 5) In today's video we see how to replace the third brake light in the early 2000s Ford Fiesta. First, let's check the user and maintenance manual for w
How to replace the front brake disc on a Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Before we begin, we will have to go and lift the front side of our Ford Fiesta. So let's start by disassembling the rear wheel, unscrewing the relati
Front disc replacement on Ford Fiesta
Ford Fiesta (2008-2017 / MK VI, Fiesta 6, MK 6) Replacing the disc brake on a Ford Fiesta? Let's see the disassembly of the brake disc. The first thing to do is remove the front wheel. We unscrew t

    Frequently Asked Questions

    • Fiesta 2008-2017 - How to fix Ford Fiesta headlight problems? Read Answer
    • Fiesta 2008-2017 - Why don't the stops at the Ford Fiesta work? Read Answer

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos