Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the engine control unit on the Ford Fiesta 1.4

Model: Ford Fiesta Fiesta 6, MK 6, MK VI - Years 2008-2017
Part: Control unit

Video tutorial
Detailed instructions - In this brief guide, you will find instructions to reset the engine control unit on the Ford Fiesta 1.4. First, open the bonnet and disconnect the negative terminal of the battery using a socket spanner. Leave the battery disconnected for about ten minutes to cut power to the control unit, allowing a proper reset, as shown in the video. Now reconnect the battery, get in the vehicle, and start the engine; check for any fault resolution.

Posted on 1 October 2026 by ScegliAuto


Related tutorials

Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In this tutorial we can see how to reset the ECU in the Ford Fiesta, an extremely simple and quick operation, to be carried out for example as an att…
Ford Fiesta (2008-2017 / Fiesta 6, MK 6, MK VI) In today's tutorial video, you will learn how to remove the internal ECU from a Ford Fiesta. First, open the bonnet of the car and disconnect the two…
Ford Fiesta (2002-2008 / Fiesta 5, MK 5, MK V) The control unit needs to be removed and is located approximately under the steering wheel, to your left, where the designated compartment is. Before…

Other guides you may be interested in

How to Open the Bonnet of an Iveco Daily?

To open the bonnet of the Iveco Daily, go inside the cabin to locate the lever that unlocks the bonnet latch: this lever is found at the bottom left of the dashboard relative to the steering column and is yellow. Pulling this lever inward will unlock the bonnet latch, allowing you to go outside: by inserting your hand at the top of the grille, you can move the latch hook to the left, thus lifting the bonnet. Once opened, you can close it by pushing it down with sufficient force.

Watch the video!


by ScegliAuto

More videos