Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the ECU Located in a Ford Fiesta?

Model: Ford Fiesta Fiesta 6, MK VI, MK 6 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Control unit

See other generations:
Video tutorial

In this video, see where the ECU is located in a Ford Fiesta and how to proceed if you need to replace it, for example, in case of a fault. As shown, it is located inside the engine bay, near the battery.

To access and remove it, first remove the air filter box and its associated duct, then take off the protective plastic cover. Once done, disconnect the various connectors, remove the ECU from its housing, and proceed with installing the replacement if necessary.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

Removing the ECU from a Ford Fiesta
Removing the ECU from a Ford Fiesta
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In today's tutorial video, you will learn how to remove the internal ECU from a Ford Fiesta. First, open the bonnet of the car and disconnect the two…
How to reset the ECU on the Ford Fiesta?
How to reset the ECU on the Ford Fiesta?
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) In this tutorial, you will see how to reset the ECU on the Ford Fiesta, a very simple and quick operation that can be performed as an attempt to reso…
How to reset the Ford Fiesta car radio
How to reset the Ford Fiesta car radio
Ford Fiesta (2008-2017 / Fiesta 6, MK VI, MK 6) Today we will see the instructions that will allow us to reset the Ford Fiesta car radio, in simple and quick steps. There are in fact two methods to…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos